IT & Software100% OFF

Linux Technical Interview Questions and Answers

Udemy Instructor

4.571429(987 students)

Self-paced

All Levels

About this course

Do you have all the Linux skills to qualify for the job but not getting much luck in the interview? Are you starting out a new career in Linux or IT and need help in interview? Are you looking for all the tools and tips as to how to ACE technical interview?

If you answer is YES to any of the above questions then you have reached the right course. I will help you guide through how to overcome some technical interview hurdles. Welcome to the Linux Technical interview Questions and Answers 2020 where you are going to dominate the Linux Technical job interview.

Take the course, learn the material and go into technical interview with a confidence that you are prepared! Get an edge over other candidates that did not take the time to learn technical interview skills. Become one of my dozens of students that successfully took the course and secured a job.

This course has been expertly crafted to make sure that you rapidly improve your Linux interview skills, Turbocharge your productivity and Boost your career with no time wasting and no useless fluff. Here is some testimonials from our students:========================= TESTIMONIALS ==============================="Very very useful Thanks " ----- Ambadas Bhagat ★★★★★"I enrolled in this course having some familiarity with Linux but not much. Content was very well presented and documented for beginners and for those who are little bit familiar with the Linux.

It covers almost all aspects of Linux. I am fully satisfied. " ----- Peter Lucic ★★★★★"Great.

This course gives me a lot of knowledge on Linux. It helps my work a lot. Thank you".

----- Le Hoang Son ★★★★★ ----- Michele Berardi ★★★★★ ----- Bo Liu ★★★★★ ----- Gail Edmondson ★★★★★ ----- Pooja Babu ★★★★★ ----- Latenis Dent ★★★★★There is no reason for you to study Linux for months and years and not succeed in securing a job because of a Technical Interview. Linux system Troubleshooting - Part 11- How to view all messages generated by the system since the last reboot on RHEL7/CentOS 7? 2- How to check log messages related to kernel?

3- How can you continuously monitor logs as they come in? 4- Where can you find messages related to the installation of Linux? 5- Where are most of the log files located?

Linux system Troubleshooting - Part 2Kernel Parameters - Ulimit6- To improve performance, how can you safely set the limit of processes for the super-user root to be unlimited? 7- Where can you set the resource limits for users logged in via PAM? 8- How to check ulimit for a user?

9- How to check and increase the limit of opened files in Linux? 10- How to view run time kernel parameters? 11- How to change runtime kernel parameter for maximum shared segment size in bytes?

12- How to view Boot time parameters and which file is modified to change these parameters? Linux system Troubleshooting - Part 3Troubleshooting with uptime lsof pidof sar and more13- How to check system load without top command? 14- By default load average is shown in how many intervals?

15- How can you get the physical and virtual memory statistics? 16- How to check cpu utilization and other statistics? 17- How to find process id of a process and kill it immediatley?

18- How to list all open files by specified user? 19- How to list all open files by specified command? 20- How can you list all network connections by port 22?

Advanced Linux system administrations questions and answers:1- Run a command that shows all lines except any lines starting with the a character "#" in a file? 2- How can you continuously monitor log files for errors? 3- How to automatically remove files older than 7 days by creating a cron job to run every night?

4- How to list/print all created users on the system and send(redirect) them to a file? 5- How would you list only the 2nd column from a file? 6- How to broadcast a message to all logged -in users?

7- How to create a user with no login access? 8- How to schedule a server reboot in 15 minutes? 9- How to find disk usage by the largest directories?

10- How to prevent users from deleting other users files in a directory? 11- How to display 10th line of a file only? 12- Your server got hacked.

Due to the amount of damage, the whole server needs to be restored. How would you go about doing that? 13- What necessary steps should be taken to enhance the security of a server after the initial install?

14- Which file is the most commonly known to check for log messages? 15- How and why to disable ping? 16- Explain the different fields in /etc/passwd?

17- Which cammand can tell how long the system has been running? 18- How to check if a port is listening? 19- You got a ticket stating server is down, how would you troubleshoot?

20- How to find all files in /bin with specified(755) permissions? Part 2: 1- What is the default port & configuration file of SSH Server ? 2- How to change the default ssh port in linux ?

3- How to change Maximum allowed sessions through SSH? 4- What is the configuration file of ssh client ? 5- How to disable SSH root login in linux server ?

6- How to allow only specific users to ssh your linux server ? 7- SCP and how its used? 8- How to check SSH server’s Version ?

9- How to setup password less ssh authentication in Linux? Part 3: 1- How to extend SWAP space? 2- How to extend a logical volume?

3- How to create a logical volume? 4- How to create a volume group? 5- How to create a physical volume after the disk space has been added?

6- Is it possible to increase the logical volume on the fly? 7- How to reduce the logical volume and is it possible to reduce it on the fly? 8-9- How to scan disks for existing volume group and how to scan a logical volume from existing volume group?

10-11-12-13- How to activate, deactivate, disable/enable a logical volume and a volume group? How to activated the logical volume which in deactivated state? How to disable the volume group ?

or Deactivate the volume group? How to enable the volume group ? or Activate the volume group?

14- What is the default size of a physical extent in LVM? 15-16-17- How to list the available logical, physical volumes and see detailed volume group info on the system? How to list the available physical volumes in LVM?

How to see the detailed volume group information? Part 4: 1- How to find files that are over 10MB in size? 2- How would would you run a command that shows all lines containing a character # in a file?

3- How would you display all lines of a file with line numbers? 4- How to find current system information such as the version or release info of your server? 5- Where are the files located for network interfaces?

6- Which command can you run to find if a certain package has been installed? 7- How to find out total lines in a file without opening that file? 8- How to find disk usage by the largest directories?

9- How to find all directories named conf under root? 10- How to find files not accessed in over 3 days? 11- How to view difference between 2 files?

12- What is the location of system configuration files that should be backed up regularly? 13- What is the command to view all the currently logged in users? Linux system administration Q&A1- Which 2 files contain default values when creating a user with useradd command?

Questions 2-8 covered in one lecture: 2- What is the command to create a user with a pre defined uid, shell and home directory? 3- How to delete a user with his home directory? 4- How to create a user specifying a primary/Secondary grp?

5- How to change primary group for any user? 6- How can you give a normal user all the root level privileges? 7- How can you give sudo access to any user without asking him to provide password every time he runs a command?

7- How to view the User's login and logout details? 8- How to lock & unlock the User Account ? Questions 9-14 covered in one lecture: 9- What is the command to view and change the expiry date for any user?

10- What are the fields of /etc/passwd file? 11- What is the difference between . bash_profile and .

bashrc? 12- What are the details you get with finger command? 13- Name 3 files which are automatically created inside any user's home directory when a user is added?

14- What is the command to view all the currently logged in users? Linux basic system administration questions and answers: 1- Which 2 files contain the default values when creating a user with useradd command? Questions 2-8 covered in part 2: 2- What is the command to create a user with a pre defined uid, shell and home directory?

3- How to delete a user with his home directory? 4- How to create a user specifying a primary/Secondary grp? 5- How to change primary group for any user?

6- How can you give a normal user all the root level privileges? 7- How can you give sudo access to any user without asking him to provide password every time he runs a command? 7- How to view the User's login and logout details?

8- How to lock & unlock the User Account ? Questions 9-14 covered in part 3: 9- What is the command to view and change the expiry date for any user? 10- What are the fields of /etc/passwd file?

11- What is the difference between . bash_profile and . bashrc?

12- What are the details you get with finger command? 13- Name 3 files which are automatically created inside any user's home directory when a user is added? 14- What is the command to view all the currently logged in users?

Linux Basic Technical questions and answers How to display hidden files? Whats the difference between $ and # prompts on CLI? How to find an error in a file?

How to make a directory? How to remove a directory? How to create a file?

How to move a file? How to delete a file? What is the default port # for DNS What is the DNS package name?

what is the configuration file for DNS and its location? List 3 types of file system? List any 4 Linux flavors?

How to log off from Linux system? How to check if a package is installed? How to check your previously typed in commands?

Where are zone files located for DNS? What is the command to find your current directory? How to check file permissions?

How to find file type of a file? How to find where passwd command is located? what command is used for changing file permissions?

What command is used to read top/bottom part of a file? How to check mtu, ip and MAC address? How to get help on certain commands?

How to find your host name? How to count total lines of a file? What is the command to create a group?

How to reboot a Linux machine with init command? Where are the user passwords saved? How to find running processes on your system?

where is the network time configuration file located? When is the last command used? Student suggested Videos19 new Lectures added to student suggested videos Section: Boot Process RHEL/CentOS 6 and 7 19:35 minutesRun Levels 5:41 minutesTargets 9:05 minutesNIC Bonding 10:00 minutesWhat are Linux Distributions?

6:47 minutesWhat are the advantages of using Linux?

Skills you'll gain

Operating SystemsEnglish

Available Coupons

Course Information

Level: All Levels

Suitable for learners at this level

Duration: Self-paced

Total course content

Instructor: Udemy Instructor

Expert course creator

This course includes:

📹Video lectures
📄Downloadable resources
📱Mobile & desktop access
🎓Certificate of completion
♾️Lifetime access

$0$102.99

Save $102.99 today!

Enroll Now - Free

Redirects to Udemy • Limited free enrollments

Share this course

https://freecourse.io/courses/linux-technical-interview-questions-and-answers

If you’ve ever wanted to build and publish your own Android app but felt overwhelmed by traditional coding, this course will completely change your approach. Vibe Coding for Android Apps teaches you how to use AI-powered development to build, launch, and scale real apps on the Google Play Store — faster and smarter.In this hands-on course, you’ll learn how to generate Android app structures using AI, build apps with React Native and Expo, and implement core features like forms, storage, camera access, notifications, and API integrations. You’ll also master Play Store publishing, avoid common rejections, and optimize your app listing using App Store Optimization (ASO) strategies.Beyond development, this course focuses heavily on monetization and growth. You’ll understand how to implement AdMob ads, in-app purchases, subscriptions, and ethical monetization models that generate sustainable income. We’ll also cover analytics, crash management, user retention strategies, and multi-app portfolio building.By the end of this course, you won’t just have knowledge — you’ll have at least one production-ready Android app published on the Play Store, along with a clear monetization and scaling roadmap.If you’re a founder, indie developer, student, or side-hustler looking to turn ideas into income-generating Android apps using AI, this course is your complete blueprint.

Vibe Coding for Chrome Extensions – Build, Launch & Monetize

Udemy Instructor

If you’ve ever wanted to build Chrome extensions but felt stuck because of coding complexity, this course will completely change the way you approach development.Vibe Coding for Chrome Extensions – Build, Launch & Monetize is designed to help you go from idea to a real, published extension—without needing years of programming experience. Instead of traditional slow learning, you’ll use AI as your co-developer to generate code, fix bugs, design UI, and build faster.In this course, you’ll learn how Chrome extensions actually work, from Manifest V3 fundamentals to background scripts, content scripts, and popup interfaces. Then you’ll move into hands-on building, creating multiple real extensions like a procrastination blocker, AI text summarizer, screenshot-to-notes tool, and more.But this course goes beyond just building.You’ll learn how to publish your extensions on the Chrome Web Store, avoid common rejections, and create high-converting listings with optimized descriptions and visuals. You’ll also explore monetization strategies like freemium models, subscriptions, Stripe payments, and API-based pricing—so your extensions can generate real income.On top of that, you’ll understand how to grow your extensions using SEO, community launches, YouTube, and outreach, and how to scale into multiple extensions or even turn your tools into SaaS products.By the end of this course, you won’t just know how to build extensions—you’ll have created real products and developed the mindset to turn ideas into income-generating digital assets.

Java Build Tools (Maven & Gradle) - Practice Questions 2026

Udemy Instructor

Master Java Build Tools: Maven and Gradle Practice ExamsWelcome to the most comprehensive practice resource designed to help you master Java Build Tools (Maven and Gradle). Whether you are preparing for a technical interview, a certification, or looking to solidify your DevOps skills within the Java ecosystem, these practice questions provide the rigorous testing environment you need.Why Serious Learners Choose These Practice ExamsIn the modern software development landscape, knowing how to code in Java is only half the battle. Efficiently managing dependencies, automating builds, and orchestrating deployments are critical skills. Serious learners choose this course because it moves beyond surface-level syntax. We focus on the "why" behind build configurations, ensuring you can troubleshoot complex dependency graphs and optimize build pipelines in professional environments.Course StructureThis course is meticulously organized into a progressive learning path to ensure no gaps in your knowledge:Basics / Foundations: Focuses on the fundamental installation, directory structures (standard Maven layout), and the basic purpose of Build Automation Tools.Core Concepts: Covers the essential building blocks such as the Project Object Model (POM. xml) in Maven and Build. gradle scripts. You will explore lifecycles, phases, and basic task execution.Intermediate Concepts: Delves into dependency management, repositories, scopes (compile, runtime, test, etc.), and the use of plugins to extend functionality.Advanced Concepts: Explores multi-module projects, profile management, custom task creation in Gradle, and build performance optimization techniques like caching and parallel execution.Real-world Scenarios: Challenges you with "broken build" situations, version conflicts (Diamond Dependency issues), and CI/CD integration logic.Mixed Revision / Final Test: A comprehensive simulation of a professional assessment covering the entire spectrum of both Maven and Gradle to ensure total readiness.Sample Practice QuestionsQUESTION 1 In Maven, if a dependency is marked with the scope "provided", which of the following statements is true?Option 1: The dependency is required for compilation and is packaged in the final JAR/WAR file.Option 2: The dependency is only required for running tests and is not available during compilation.Option 3: The dependency is required for compilation but is expected to be provided by the JDK or the runtime container at execution.Option 4: The dependency is used only during the site generation phase.Option 5: The dependency is downloaded but never used by the compiler.CORRECT ANSWER: Option 3CORRECT ANSWER EXPLANATION: The "provided" scope is used for dependencies that are necessary to compile the code but should not be packaged in the artifact because the environment where the code runs (like a Tomcat or WildFly server) already contains those libraries (e.g., Servlet API).WRONG ANSWERS EXPLANATION:Option 1: This describes the "compile" scope, which is the default.Option 2: This describes the "test" scope.Option 4: This is incorrect; the site phase uses specific reporting plugins, not the provided scope.Option 5: If a dependency is not used by the compiler, it wouldn't be part of the classpath; provided dependencies are explicitly on the compilation classpath.QUESTION 2 In Gradle, which file is primarily used to define the settings for a multi-project build, such as including specific sub-projects?Option 1: build. gradleOption 2: settings. gradleOption 3: gradle. propertiesOption 4: local. propertiesOption 5: gradlew. batCORRECT ANSWER: Option 2CORRECT ANSWER EXPLANATION: The settings. gradle file is executed during the initialization phase. Its primary role is to determine which projects are going to take part in the build, making it essential for multi-project structures.WRONG ANSWERS EXPLANATION:Option 1: This is the build script where tasks and configurations for a specific project are defined.Option 3: This is used for configuring the build environment and project properties (like JVM memory).Option 4: Usually used for SDK paths or machine-specific configurations, not project structure.Option 5: This is the Windows executable for the Gradle Wrapper.QUESTION 3 Which Maven lifecycle phase is responsible for taking the compiled code and packaging it in its distributable format, such as a JAR?Option 1: compileOption 2: validateOption 3: installOption 4: packageOption 5: deployCORRECT ANSWER: Option 4CORRECT ANSWER EXPLANATION: The "package" phase takes the compiled code from the target/classes directory and compresses it into the format specified in the tag of the POM file.WRONG ANSWERS EXPLANATION:Option 1: Compile simply converts source code to bytecode.Option 2: Validate only checks if the project is correct and all necessary information is available.Option 3: Install moves the package to the local repository (. m2) for use in other local projects.Option 5: Deploy copies the final package to a remote repository for sharing with other developers.Course Features and BenefitsWelcome to the best practice exams to help you prepare for your Java Build Tools (Maven & Gradle) - Practice Questions. This course is designed to be your final stop before your big exam or interview.You can retake the exams as many times as you want to ensure mastery.This is a huge original question bank curated by industry experts.You get support from instructors if you have questions regarding any concept.Each question has a detailed explanation to help you learn from your mistakes.Mobile-compatible with the Udemy app for learning on the go.30-days money-back guarantee if you are not satisfied with the quality.We hope that by now you are convinced! There are a lot more questions inside the course waiting to challenge you.

0.0•496•Self-paced

FREE$98.99

Enroll