FreeCourse Logo
FreeCourse.io
Verified CouponsFree CoursesJobsBlog
Categories
Home/Courses/GRID Exam Prep: GIAC Response and Industrial Defense #2
GRID Exam Prep: GIAC Response and Industrial Defense #2
IT & Software100% OFF

GRID Exam Prep: GIAC Response and Industrial Defense #2

Adrian Găitan
0(0 students)
Self-paced
Intermediate

About this course

The second time you see a question, you are often recalling the answer rather than reasoning to it. That is the single biggest weakness of practicing on one question bank, and it is why scores on a re-sit look better than exam day does. This is Volume 2.

Five more timed practice tests, 430 new questions, nothing carried over from Volume 1. Same scope, same difficulty, different questionsCoverage follows the same seven GRID objectives at the same weighting, so your score here is directly comparable to your Volume 1 score. If your Volume 1 result was real understanding, it holds.

If it was memory, this set will say so quickly. Every question is single-best-answer, matching GIAC's format, and every question is followed by an explanation that names the reasoning, the failed distractor and the objective area to revisit. What the questions coverActive defense as GIAC defines it, and what the major ICS incidents changed about defensive postureDetection and analysis of network security evidence inside an industrial environmentAsset awareness and visibility where active scanning is restricted or forbiddenMonitoring against real protocol behavior: Modbus function codes, DNP3, OPC UA security modes, S7 COTP parameters, IEC 104 and EtherNet/IP CIP servicesIncident response and forensics on controllers, engineering workstations and historians, with safety and uptime as hard constraintsThreat hunting, hypothesis building and malware analysis applied to OT toolingThreat intelligence, from consuming a report to shipping a detectionHow to work through itTake one test per study session under real time pressure.

Score it, then read every explanation, including on the questions you answered correctly, because a correct guess and a correct answer look identical on a score report and nowhere else. Track which of the seven objectives your misses cluster in. Study that objective, then move to the next test.

Across both volumes that gives you ten full timed sittings and 860 questions, which is enough repetition that exam format, pacing and question phrasing stop costing you points and the only thing being tested is what you actually know. Please note: this is an independently produced preparation course. It is not affiliated with, authorized by, endorsed by or sponsored by GIAC or the SANS Institute.

All questions are original study material, not actual exam items. Confirm the current number of questions, time limit, passing score and permitted materials for your specific attempt in your own GIAC account before exam day.

Skills you'll gain

IT Certificationsen

Available Coupons

Loading...

Course Information

Level: Intermediate

Suitable for learners at this level

Duration: Self-paced

Total course content

Instructor: Adrian Găitan

Expert course creator

This course includes:

  • 📹Video lectures
  • 📄Downloadable resources
  • 📱Mobile & desktop access
  • 🎓Certificate of completion
  • ♾️Lifetime access
$0$89.99

Save $89.99 today!

Enroll Now - Free

Redirects to Udemy • Limited free enrollments

Share this course

https://freecourse.io/courses/grid-exam-prep-giac-response-and-industrial-defense-2

You May Also Like

Explore more courses similar to this one

GRID Exam Prep: GIAC Response and Industrial Defense #1
IT & Software
0% OFF

GRID Exam Prep: GIAC Response and Industrial Defense #1

Adrian Găitan

Most candidates lose GRID points in one of two places. They know industrial systems well but answer like an enterprise IT analyst, reaching for isolation and reimaging when the process is still running. Or they know security theory but have never had to weigh a containment decision against a turbine that cannot be stopped.These five practice tests are designed to surface both problems while you still have time to fix them.What is inside430 original single-best-answer questions across five timed practice tests. No multi-select, no fill-in-the-blank, because that is not how GIAC writes this exam. Every question carries a written explanation covering why the correct answer is correct, why the most tempting wrong answer fails, and which objective area the question belongs to, so you know exactly what to go back and read.CoverageQuestions are distributed across the seven official GRID objectives, grouped the way GIAC groups them on its own certification page:Active defense in an ICS environment, including what Stuxnet, Industroyer, TRITON and Industroyer2 taught defendersDetection in an ICS environmentVisibility and asset awareness, including passive discovery where scanning is prohibitedMonitoring, with real ICS protocol behavior: Modbus function codes, DNP3, OPC UA, S7comm, IEC 104, EtherNet/IP and CIPIncident response and forensics under industrial constraints, including PLC and engineering workstation evidenceThreat hunting and analysis, including malware analysis applied to OT toolingThreat intelligence and how to operationalize it rather than file itRoughly a third of the questions are direct knowledge, close to half are applied scenarios where you decide the next action, and the rest ask you to interpret a log excerpt, a protocol snippet or an asset inventory and say what it shows.How to use itTake test one cold. Score it, read every explanation including on questions you answered correctly, and write down the objectives where you guessed. Study those, then take the next test. By test five you should be scoring consistently rather than scoring well once.Volume 2 of this series adds five more tests and 430 more questions at the same scope and difficulty, for a second full pass closer to exam day.Please note: this is an independently produced preparation course. It is not affiliated with, authorized by, endorsed by or sponsored by GIAC or the SANS Institute. All questions are original study material, not actual exam items. Confirm the current number of questions, time limit, passing score and permitted materials for your specific attempt in your own GIAC account before exam day.

0.0•0•Self-paced
FREE$92.99
Enroll
GWAPT Exam Prep: GIAC Web Application Penetration Tester #1
IT & Software
0% OFF

GWAPT Exam Prep: GIAC Web Application Penetration Tester #1

Adrian Găitan

GWAPT stands for GIAC Web Application Penetration Tester, the hands on offensive security credential tied to SANS SEC542. It tests web application penetration testing across 8 official domains, using a mix of standard multiple choice and CyberLive questions that ask you to read real HTTP traffic, proxy tool output and payloads instead of picking a definition from a list.This course gives you 5 full length practice exams, 410 questions total, built to the same format as the real thing: 82 questions per exam, 3 hours on the clock, single best answer only. Every question comes from original scenarios written specifically for GWAPT, covering all 8 domains: web application overview, reconnaissance and mapping, configuration testing, authentication attacks, session management, SQL injection, CSRF and XSS and client injection, and testing tools.Each question includes a short rationale explaining why the correct answer is right and why the strongest distractor is wrong, so you can use the bank as a study reference, not just a scoring exercise. CyberLive style questions are clearly labeled and built around realistic Burp Suite, OWASP ZAP and sqlmap style output, raw HTTP request and response pairs, and injection payloads, the same kind of material you interpret live in the exam's hands on component.What you will practice:Reading raw HTTP requests and responses under exam conditionsDistinguishing SQL injection types: error based, blind and time basedTelling reflected, stored and DOM based XSS apartRecognizing CSRF conditions and session management weaknessesInterpreting proxy and scanner output the way GWAPT presents itThis is the Advanced tier course: questions calibrated to GWAPT exam difficulty, not a beginner introduction to web security. If you completed SANS SEC542 or built equivalent hands on experience and want realistic, timed practice before exam day, this is where to start. If you finish this set and want a harder second pass, GWAPT Exam Prep #2 covers the same 8 domains at Elite tier difficulty.This course is practice material only. It is not affiliated with, endorsed by or produced by GIAC or the SANS Institute. Confirm the current exam format, passing score and material policy directly in your GIAC account before your attempt.

0.0•0•Self-paced
FREE$83.99
Enroll
GWAPT Exam Prep: GIAC Web Application Penetration Tester #2
IT & Software
0% OFF

GWAPT Exam Prep: GIAC Web Application Penetration Tester #2

Adrian Găitan

GWAPT Exam Prep #2 is the Elite tier follow up to GWAPT Exam Prep #1. Where the first course builds solid, exam level competence across all 8 GIAC Web Application Penetration Tester domains, this course pushes past that baseline into the edge cases, layered scenarios and multi flaw traffic that actually separate a pass from a struggle on exam day.You get 5 more full length practice exams, 410 additional questions, still built to the real GWAPT format: 82 questions, 3 hours, single best answer, CyberLive style items included. The difference is difficulty. Elite tier questions often present more than one plausible vulnerability in the same HTTP request, ask you to choose between two technically defensible answers, or combine reconnaissance, authentication and session findings into a single scenario the way a real penetration test engagement would.Every question still ships with a rationale, so a wrong answer teaches you something specific: why the distractor looked right, and what detail in the traffic actually ruled it out. Domains covered stay the same 8 official GIAC areas: web application overview, reconnaissance and mapping, configuration testing, authentication attacks, session management, SQL injection, CSRF and XSS and client injection, and testing tools, now written at a level that assumes you already know the fundamentals.Who this is built for:Candidates who finished GWAPT Exam Prep #1 and want a harder second exam setRetake candidates targeting the specific gaps that cost them the first attemptExperienced testers who found standard practice questions too easyAnyone who wants multi flaw, chained scenarios instead of isolated concept checksYou do not strictly need the first course to take this one, but if you are new to GWAPT style questions, start with GWAPT Exam Prep #1 first. This set assumes you can already read HTTP traffic and Burp Suite or OWASP ZAP output without a warm up.This course is practice material only. It is not affiliated with, endorsed by or produced by GIAC or the SANS Institute. Confirm the current exam format, passing score and material policy directly in your GIAC account before your attempt.

0.0•0•Self-paced
FREE$88.99
Enroll
FreeCourse LogoFreeCourse

Freecourse.io brings you high-quality online courses with free certificates to help you upskill, boost your career, and achieve your goals anytime, anywhere.

Resources

  • Courses
  • Jobs
  • Categories
  • Features

Company

  • About
  • Blog
  • Contact

Legal

  • Privacy
  • Terms
  • Cookies
  • Licenses

© 2026 FreeCourse. All rights reserved.